Are marble floors high maintenance?

Marble, like many other stone tiles, has very high maintenance requirements. Marble is also porous, which means it can be stained, scratched and worn easily. Marble tile is generally not recommended for kitchen floors and countertops.

Easily Scratch-able: Marble floor tiles are easily damaged if not properly maintained. They can be damaged from scratches. Softness: Marble, like any other stone, is both hard and soft.

Beside above, is marble good for bathroom floors? Marble tiles are waterproof. – Marble tiles are great for bathroom flooring because of its ability to hold water at bay.

Also asked, how do you maintain a marble floor?


  1. Dust mop floors frequently with a soft cloth.
  2. Clean surfaces with mild pH neutral dish soap or specially formulated marble cleaner.
  3. Thoroughly rinse and dry the surface with clean, clear water after washing.
  4. Blot up spills immediately, never wipe.
  5. Protect floor surfaces with non-slip mats or area rugs.

How long do marble floors last?

Our stock answer is that your floor should stay looking good for one to three years. Some floors may last up to five years without requiring attention, but this would be in low traffic areas.

How do you keep marble floors shiny?

The best DIY method to make a marble floor shiny and clean is: Wipe the marble top with a soft, dry cloth to remove any surface dirt. Wet a non-abrasive sponge with warm water, wring it out and wipe the marble’s top again. Spray the marble surface with commercial stone cleaner and wipe it off with a clean and soft rag.

What is the best cleaner for marble floors?

It is important to use a cleaner that is pH neutral. Clean the marble floors with a highly diluted mixture of pH neutral products and water or a diluted solution of dish-washing soap and water. You can use windex, baking soda, light dish-washing detergent, hydrogen peroxide, alcohol etc.

What are the advantages and disadvantages of marble flooring?

Marble floors are very slippery when wet, which can be hazardous and can result in accidental falls. It is very difficult to change/replace marble flooring once installed, as the stone of same colour and design is hard to find after few years. You have to maintain some minimal stock while buying the marble tiles.

Do marble floors need to be sealed?

The marble tile should be sealed using a neutral pH breathable sealer after installation. The sealer will need to be reapplied periodically, recommended every 12 months or so.

How often do you need to seal marble floors?

Most stone experts recommend sealing your marble countertops every 3-6 months, depending on the color and quality of the marble. To preserve the quality of your stone surface, you need to be diligent about sealing it.

Does marble floor crack easily?

Susceptible to water damage: Most natural stone is porous, and marble is especially prone to water penetration, and staining from colorful liquid agents. Brittle: Being relatively soft, marble floor tiles can suffer from cracking, breaking, and chipping.

Which marble floor color is best?

White Marbles White marble slabs are one of the best options for flooring material due to its beautiful and pure look. White marble is the most likely choice for homes as the white colour adds elegance and create serenity in the atmosphere.

How do I choose a marble floor?

1.1 Easy To Maintain: Before choosing marble flooringMarble should be easy to maintain and low on maintenance. Marble flooring should be smooth so you can clean it easily. Also, it has the property of water resistance, scratch free. 1.2 Price Range: Choose right quality marble with a pocket-friendly price.

What can you not put on a marble floor?

Here are 5 crucial mistakes you should avoid to keep your marble floors looking their best. Allowing Spills to Sit. Marble is a porous stone, which means it absorbs liquids easily. Using Acidic Cleaning Products. Not Using Doormats or Not Mopping Regularly.

What is best to clean marble floors?

Clean your marble floors with a highly diluted mixture of ammonia and water or with a highly diluted mixture of dish soap and water. (No more than 1/2 cup per bucket of water). Once you’re finished mopping, we recommended you dry the floor using a soft, fluffy towel.

How do you polish marble floors yourself?

Eco Polishing of your Marble: Use a mixture of Baking Soda and water as a polish. Combine (45 g) of baking soda to (0.9 L) of water and mix well. Then using a clean cloth, apply the mixture to your surface in a thin layer. Allow to dry for about 5 hours.

Is baking soda safe for marble?

Baking soda is a light abrasive and a natural disinfectant. However, you need to take care to use it gently on marble surfaces. A light abrasive is still abrasive. Be sure to wipe away all traces of baking soda, so it isn’t left in contact with your marble surfaces.

How do you polish marble floors by hand?

Marble Floor Polishing By Hand For natural marble, remove stain by using a damp sponge and mild soap. Rub the stain gently then rinse thoroughly. For stubborn stains, use a poultice. For cultured marble, use a nylon bristled brush to scrub surface stain with a non-abrasive household cleaner.

Can I use Pine Sol on marble floors?

Cleaning Marble Countertops and Floors. For everyday marble cleaning, keep it simple. Again, remember to avoid vinegar and other acidic cleaners when cleaning marble, even if you really, really love the smell of Pine Sol.