How do you tighten the chain on a Poulan Pro?

Loosen the guide bar nuts and turn the adjusting screw counter-clockwise 1/4 turn to loosen the chain if it is too tight. Loosen the guide bar nuts and turn the adjusting screw clockwise 1/4 turn to tighten the chain if it is loose. Tighten the guide bar nuts firmly with the guide bar adjusting wrench or socket wrench.

A damaged bar or chain may cause the chain to come loose from the bar and can be very dangerous when operating the machine. It is important to ensure that the chain fits snugly inside of the bar and that the teeth that keep it from running off of the bar are not worn down too low.

Also, how do you sharpen a Poulan chainsaw blade? How to Sharpen a Poulan Chainsaw

  1. Set the Poulan chainsaw onto a level work surface.
  2. Insert the tip of the correctly sized file into the heel of the heaviest damaged tooth.
  3. Hold the file level and steady.
  4. Rotate the chain up to the next tooth on the same side as the first.

Moreover, how tight should a chainsaw chain be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.

How do you sharpen a chainsaw blade?

Use the depth gauge tool and file to adjust the height of the depth gauges on the chain. If the depth gauges are too high, the cutters can’t reach the wood. Re-sharpen your chain every time you refill your chainsaw with fuel. Keep your chain out of the dirt when cutting or it will dull quickly.

How do you adjust the idle speed on a Poulan Pro chainsaw?

Insert a small flat-head screwdriver into the idle speed screw and turn it clockwise to increase the engine speed if it idles too slowly. As soon as the chain starts to move, turn the screw counterclockwise until the engine idles without dying and the chain stops moving for the correct idle speed.

How do you troubleshoot a Poulan chainsaw?

How to Troubleshoot a Poulan Chainsaw Check the spark plug. The first step to check this out is, take your spark plug wrench and remove the spark plug by turning it counter clockwise. Replace the spark plug. Clean out the Poulan chainsaw’s gears. Test the gears. Repair any pinched areas on the bar of the chainsaw. Pull the chain.

How do you change the spark plugs on a Poulan chainsaw?

How to Replace the Spark Plug on a Poulan Chainsaw (Model P3314) Remove the (3) screws securing the top cover to the saw. Remove the spark plug boot. Use a spark plug wrench (or socket) to loosen the spark plug. Remove the spark plug from the cylinder. The “gap” is the distance between the ground electrode (metal strap) and the center electrode.

How many times can I sharpen a chainsaw chain?

Depending on usage, a chain can usually be sharpened 3 to 5 times max.

Can you put a chainsaw chain on backwards?

Unfortunately the chain will go on either way, but if you put it on backwards, it will not cut. Remember, when holding the chainsaw, the cutting portion of the blade should be facing away from you, traveling from the back of the chainsaw to the front tip of the chainsaw.

How long should a chainsaw chain last?

As I mentioned at the top of this post, you can usually expect a chainsaw chain to last for several hundred hours of use. Depending on how often you use your chainsaw, that means it could last for 5 years, or several decades, as long as you are taking good care of your equipment.

How do you maintain an electric chainsaw?

Before putting away your chain saw for the winter, it’s a good idea to winterize it for storage. Drain chain oil and remove the chain and bar. Soak and clean the bar and chain, dry them, then apply a thin layer of oil to help preserve them and prevent rusting.

When should I replace chainsaw chain?

When to Replace a Chainsaw Chain Teeth are broken or worn unevenly. Issues with Chain Tension. Smoke is present when cutting. Sawdust, rather than coarse chips are left behind. Chainsaw feels unbalanced, cuts unevenly, or rattles when in use.

Why is my electric chainsaw not cutting?

Reason One: The most common cause of a chainsaw that won’t cut properly is a dull cutting chain. Try sharpening or replacing the chain. If the chain is too tight, the chain may not rotate at the proper speed, causing the chain not to cut properly.