The simplest way to cut cement backer board is to score the surface and snap the sheet along the scored line, similar to the way you’d cut drywall. In fact, you can use a drywall utility knife to score backer board, but a better option is a carbide-tipped scoring tool.
To cut this type of siding, use a masonry blade. Masonry blade types include abrasive materials or vented diamond blades that are used for dry cutting. The blades are designed to be used with most cutting tools, including circular, table and miter saws.
Secondly, how long will Hardie board last? Another aspect of fiber-cement siding that makes it a green building material is that it lasts for so long. James Hardie warrants the material for 50 years. HardiePlank can last longer than that, especially if painted and properly maintained.
Thereof, can you pressure wash hardiplank?
You can achieve that same sparkle on your home’s siding by cleaning it once or twice a year. Don’t use a high-pressure power washer to get the job done, as it turns out a low-pressure hose and a soft medium bristle (nonmetal) brush is the best way to remove dirt and debris from James Hardie® siding and trim.
Can you screw into Hardie board siding?
Although the siding does not require drilling pilot holes, you may need to run wire or cable through the siding, necessitating drilling a hole. While HardiePlank siding offers durability, it easily breaks; therefore, drilling through it requires proper tools and techniques.
What nails do you use for Hardie siding?
NAIL TYPE: Fasteners must be corrosion resistant, galvanized or stainless steel. Electro-galvanized nails are acceptable for use with James Hardie Siding Products, but may exhibit premature corrosion. James Hardie recommends the use of quality, hot-dipped galvanized nails.
How do you screw into concrete board?
In general, 1 1/2-inch galvanized nails will hold the board firmly in place. For flooring or wall installation, some builders choose to apply a thin layer of thinset mortar under the cement board to prevent any shifting or expansion. Even if you use this extra adhesive, you should still apply the nails or screws.
Can I use a framing nailer for Hardie siding?
The answer is, yes. Framing nail guns can be used for siding installation, if the nail being used is long enough to attach the siding firmly to your exterior wood sheathing. While it’s recommended to always use a siding nail gun for siding installation, in a pinch, you may be able to use a framing nailer instead.
How long does cement board siding last?
How long does it take to side a house?
How long does it take to install siding? Certainly, this will depend on the type of siding, but as a rule you can usually expect it to take two weeks. This time includes removal, prep, time to add insulation, and the install of the new siding, and any last modifications such as painting or trim work.
Is Hardie board dust dangerous?
Working Safely with James Hardie ® Products Excessive or protracted inhalation of fine particle silica dust can lead to a lung disease called silicosis. There is also some evidence that it may increase the risk of lung cancer if inhaled for prolonged periods of time. Smoking may also exacerbate this risk.
Can you drill into Hardie board?
It can be cut and drilled just like wood. However, drilling through cement-fiber siding goes better if you use a carbide drill bit, as opposed to a regular steel drill bit. Cement-fiber siding can be drilled while installed on a house or prior to installation.
How do you nail cement board siding?
Fastening Siding Fiber cement siding can be nailed by hand or with a pneumatic nailer. It can also be attached using corrosion resistant screws. Use hot-dipped galvanized or stainless steel nails. Nails should penetrate through the sheathing and at least 1” into studs.
Which side of the cement board goes out?
Cement board has a smooth side and a rough side. Face the rough side out if you will be using thin-set mortar adhesive to install the tile but the smooth side out if you will be using latex mastic.
How long will a diamond blade last cutting concrete?
According to experts, a low-quality diamond blade can only last around 12 hours of non-stop cutting, while high-quality blades can cut materials up to 120 hours. Another thing that can affect the blade’s life is the material you are cutting.
What is Hardie board made of?
Hardie board is a special siding material that uses cement fibers to create a more durable and attractive product. Cement is combined with sand, water and cellulose wood fibers to create a material particularly suited to protect home exteriors. Hardie board is an innovative product, but it’s not new or unproven.